Pella / Cifial Euro Style Handles, 85mm Discontinued - See Notes

DISCONTINUED Pella / Cifial OLD EURO style Single Point Mortise lock hardware: -
The inside of profile cylinder has a square hole for thumbturn.
Center of handle to center of thumbturn 3-5/16 inch (85mm) - See additional pictures
NEW HARDWARE would be 3-5/8 inches (92mm)
Pella original trim plates were 1-3/4 x 9-13/16; mounting screws holes were spaced at 8-3/8;
This Handle set was used Primarily with the Pella Single Point Lock - See Additional Images.
Handle Spacing: 85mm ( 3-3/8)
Mortise Lock Backset: 57mm ( 2-1/4)
Cylinder Type: Euro / Profile with Square for Thumbturn

The Pella Door Requires New Lock and Hardware Trim - Complete Replacement
Contact All About Doors & Windows for Replacement Options.
See 40177  Pella Replacement Kit, Serveral handle options with new mortise lock