How to Install Corner Guides on Keller Shower Doors

This guide is intended to guide the installation or replacement process of Keller shower door corner guides, part #18262 on our website.

1. Insert short split stub of guide into the bottom track (Figure A).

2. Standing on the outside of the tub, lift the inside sliding panel (rollers should face inward and etched pattern on glass should be on tub-side) and position rollers into the inside header roller track.

3. Slide the nylon guides into the bottom edge of the sliding panel, one on either side of the panel (Figure B).

4. From the inside of the tub, use #6 x ¼" thread-forming screws to secure the guides to the panel. While tightening screw, gently use pressure of finger to ease short split stub higher into place in bottom track.