Olympus Sliding Glass Patio Door Handle Weiser Keyed Center Thumb Turn Door Handleset
Olympus Keyed Handle Set, CENTER Thumb, Sliding Glass Patio Doors
Used on wood, vinyl, fiberglass, composite or aluminum doors.
Handle Set may be used with Single, Double or Multi-Point Locks
This set is compatible with 3 hole pattern hole fabrication
(Optional Screws for 1-1/4 to 2-1/4 inch stile thickness available)
One and Two point mortise locks not included.
Application: Used with Internal Mortise Lock with hook type latch
Thumb Turn Position: Centered on Plate (some are Off Centered)
Escutcheon Plate Width: 1-5/16 Inch
Escutcheon Plate Height: 10 Inch
Escutcheon Plate Screw Hole: 3-15/16 Inch Center
Handing: Non-Handed, fits left or right hand doors
Door Thickness: Standard 1-3/4 inch - Optional 1-1/4 - 2-1/4 Inch available
Function: Active KEYED, 2 Keys with Lock
Keyway: Special Restricted keyway - Key blanks not available locally
Material: Zinc Diecast
Finish: Satin Chrome, Tan
Other Finishes: See 14294-SC with Schlage 5 pin
Contents: Inside/Outside Plate, Inside/Outside Handle, Keyed cylinder, 2 Keys, Installation Screws
Related Patio Door Hardware:
14291 - Non Keyed, Off Center Thumb Turn
14292 - Non Keyed, Centered Thumb Turn
14293-WR: Olympus Keyed Handle Set, Off-Center Thumbturn, Weiser Keyway
14293-SC1: Olympus Keyed Handle Set, Off-Center Thumbturn, Schlage Keyway
14294-SC1: Olympus Keyed Handle Set, Centered Thumbturn, Schlage Keyway
14295 - Dummy Version, NO thumb turn
15145 - Single Point mortise lock
15187 - Two Point mortise lock