Andersen / EMCO Storm Door Strike Plate - Discontinued
Currently not available.
This is a Storm Door Strike Plate for a single point Mortise Lock.
It can be used on a 400, 2000, 3000 or 4000 series Storm Door made by Andersen / EMCO.
It is available in 3 colors / finishes:
Polished Brass, Brushed/Satin Nickel or Oil Rubbed Bronze
Strike Plate Measurements:
Length: 8-3/16 inch
Width: 7/8 inch (22mm)
Mounting Screw Hole Spacing: Top hole to bottom hole - 7-1/2 inch
(see second image)
NOTE:
This strike plate is used with the single point mortise locks 306200 and 306201 (not included)
It may not work as a replacement for other mortise locks or the multipoint lock found in some Andersen Storm Doors.
This is a Storm Door Strike Plate for a single point Mortise Lock.
It can be used on a 400, 2000, 3000 or 4000 series Storm Door made by Andersen / EMCO.
It is available in 3 colors / finishes:
Polished Brass, Brushed/Satin Nickel or Oil Rubbed Bronze
Strike Plate Measurements:
Length: 8-3/16 inch
Width: 7/8 inch (22mm)
Mounting Screw Hole Spacing: Top hole to bottom hole - 7-1/2 inch
(see second image)
NOTE:
This strike plate is used with the single point mortise locks 306200 and 306201 (not included)
It may not work as a replacement for other mortise locks or the multipoint lock found in some Andersen Storm Doors.