Skip to main content
  • Home
  • ›
  • Blog
  • ›
  • G-U Europa Series Multipoint Locks: Old Style vs. New Style

G-U Europa Series Multipoint Locks: Old Style vs. New Style

Written by
Web Team
Published on
June 5th, 2026

Replacing G-U Europa Series Multipoint Locks: Old Style vs. New Style


Replacing an older G-U multipoint lock isn't always a straight swap. The old designs have been discontinued, and the newer replacements aren't built quite the same way — which means a little homework up front can save you a lot of headaches. Here's what you need to know before you order a replacement.

The French company G-U makes a variety of multipoint locks with a large selection of styles that offer Roller, Tongue, Shootbolt, Hook, and Latch Bolt versions of locking devices. G-U offers the Europa Series with the key cylinder below the handle and the New Breed with the cylinder above the handle. The older style lock designs have been discontinued and must be replaced with the newer style. One problem is that the old style and new style have different lock bodies and are not interchangeable. Also, the position of the locking devices has changed. When replacing the old style with the new, it may be necessary to relocate the strike plates on the door frame.


Note: This article features the old-style Europa Series multipoint locks, with the cylinder below the handle.

Although the images look similar, the actual positions of the latch and deadbolt have changed. This might require relocating the latch and deadbolt strike plates on some doors.

Tongue (Tripact) Versions


On the Tripact (tongue version), the tongue is larger on the old style and is located in different positions than the new version. Also, G-U did custom multipoint locks for Atrium, Pella, and other companies; these have been discontinued and are not available. The only replacement is the new style with the tongues in different positions. The standard handle height — measured from the center of the handle to the bottom of the faceplate — is 889mm (35″). This measurement might vary. Note: We will offer options when available.

The above pictures are not to scale. A = Lock body, X = Backset.


Roller Versions


The roller version has similar issues; the rollers are not in the same position. When measuring the existing lock, determine which version you have and where the rollers or other locking devices are located in relation to the handle position.


Identifying the Lock Body


The lock bodies on the old style and new style are not the same size, so they cannot be interchanged. Generally, the mortise lock body had a number stamped in the metal — 45/92, 50/92, etc. The first number was the backset, and the second was the spacing for the handle and cylinder. Thus, a 45/92 was a 45mm (1-3/4 inch) backset and 92mm (3-5/8 inch) spacing from the center of the handle to the center of the thumb turn or keyed cylinder. This information is helpful in determining a replacement lock.

Before ordering and changing the existing multipoint lock, be sure you understand what is needed to change from one lock to another. Some carpentry skills and a mechanical aptitude are helpful. If you don't understand this information, it might be better to hire a carpenter, locksmith, or someone who does.


Need Parts or Have Questions?


All of the products featured in this guide are available in our online store. If you need help choosing the right multipoint lock or have questions about replacement, our team is here to help.


Take a look at our selection of G-U / Ferco Multipoint Locks and Hardware to find the right fit for your door.


Not sure exactly what you have? Fill out our Multipoint Lock Identifier worksheet and our expert team will help you identify your current multipoint lock or find the best replacement for your lock or multipoint lock system.


Not sure what part you need? Use our Part Identifier form and we'll help you identify it quickly and accurately. Whether you're troubleshooting an issue or just need guidance, we're happy to assist with any door or window part questions you may have.


Looking for a specific part? Browse AllAboutDoors.com to find what you need quickly and easily.