Storm Door Mortise Lock and Handle with Double Keyed Cylinder 0.875 Inch Backset

Wright Storm Door Handle sets fit doors that have the mortise lock in the center. If your door has a lock offset to inside or outside, the key cylinder will not fit correctly.

Mortise Lock and Storm Door Hardware with Double Keyed Cylinder
The hardware and mortise lock faceplate are polished with brass.
Wright Hardware: Vermont Series Mortise Lock.
Backset: 7/8 inch
Fits 1 to 1-5/8 inch thick door.
Double throw deadbolt
Deadbolt expends 3/8 inch on the first turn, then 5/8 inch on the second turn.
The Cutout and screw holes for this lock may not be the same as other Wright Hardware.
Solid brass trim plates with curved handles.
Exterior faceplate screw holes 7-1/8 inches apart.
Screws on the inside bolt to the outside plate screws are visible on the inside only.
The latch faceplate measures 13/16 x 7-1/2 inches.
Uses key on both sides - double cylinder key lock

Fits Door Thicknesses: 1 Inch, 1-1/4 Inch, 1-1/2 Inch (3 spindle sizes included).

Additional key blanks available as part #302051
Single-cylinder version: #302043

Learn how to Change Out Your Mortise Lock