HOPPE Frankfurt A117 / 2246N Active Multipoint Handleset No Cylinder

HOPPE Frankfurt A117 / 2246N Active Multipoint Handleset No Cylinder

This is a Hoppe Frankfurt lever handleset for a multipoint lock.
CYLINDER NOT INCLUDED!

It is constructed from Aluminum and will fit on doors that are 1-3/4 inch thick.
Includes interior and exterior handle levers with back plates, spindle and all necessary installation hardware.

Measurements:
Escutcheon Plate Length - 245 mm, 9 5/8 inch
Escutcheon Plate Width - 30 mm, 1.18 inch

Screw Hole Spacing:
Top screw hole spacing - 200 mm, 7 7/8
Bottom screw hole spacing - 21.5 mm, 7/8 inch
CTC - 92 mm, 3-5/8 inch (center of handle to center of cylinder)

Available Finishes:
Clear Anodized

Available Functions:
Active - Used most commonly on the primary functioning door. Cylinder holes on interior and exterior both. Includes lock cylinder with thumbturn and key set.
Inactive - Used on an inactive panel. Cylinder hole on the interior only. Includes half lock cylinder with thumbturn only.

Note: Certain functions will also include additional hardware such as lock cylinders and key sets.

Priced and sold each.