Andersen Emco Keyed 3 Post Storm Door Hardware w/ Deadbolt for 1-1/2 Inch Doors
Andersen / Emco keyed split finish 3 post storm door hardware handle set with deadbolt for 1-1/2 inch doors in polished brass and black.
The original hardware is discontinued and was not split finish. It was the same color inside and outside. (306003)
This handle set is a replacement for 306003 is split finish black on the inside and polished brass on the outside.
Handle set has 3 posts with hole spacing from top the bottom screw of 5-1/2 inch.
Please note that the bottom hole for the key cylinder is not round, it is oval. The 4th screw is a sheet metal screw that goes in the door.
Outside Plate Height: 8 Inch
Outside Plate Width: 1-3/8 Inch
Outside Plate Hole Spacing: 1-3/16 Inch, 3-13/16 Inch
Inside Plate Height: 2-1/2 Inch
Inside Plate Width: 1-5/16 Inch
Inside Plate Hole Spacing: 1-3/4 Inch
Inside Deadbolt Height: 2-3/4 Inch
Inside Deadbolt Width: 1-5/16 Inch
Inside Deadbolt Hole Spacing: 1-3/4 Inch
Finish: Polished Brass and Black
Door Thickness: 1-1/2 Inch
Cylinder: American Style with 1 Inch Flat Tailpiece
Keyway: Rekeyable to SC1 Keyblank 5 Pin Schlage
Priced and sold as kit.
For a Polished Brass exterior with White interior, please see 306007 which fits 7/8" thick doors. If your door is thicker, you will need to reuse your current screws for installation
The original hardware is discontinued and was not split finish. It was the same color inside and outside. (306003)
This handle set is a replacement for 306003 is split finish black on the inside and polished brass on the outside.
Handle set has 3 posts with hole spacing from top the bottom screw of 5-1/2 inch.
Please note that the bottom hole for the key cylinder is not round, it is oval. The 4th screw is a sheet metal screw that goes in the door.
Outside Plate Height: 8 Inch
Outside Plate Width: 1-3/8 Inch
Outside Plate Hole Spacing: 1-3/16 Inch, 3-13/16 Inch
Inside Plate Height: 2-1/2 Inch
Inside Plate Width: 1-5/16 Inch
Inside Plate Hole Spacing: 1-3/4 Inch
Inside Deadbolt Height: 2-3/4 Inch
Inside Deadbolt Width: 1-5/16 Inch
Inside Deadbolt Hole Spacing: 1-3/4 Inch
Finish: Polished Brass and Black
Door Thickness: 1-1/2 Inch
Cylinder: American Style with 1 Inch Flat Tailpiece
Keyway: Rekeyable to SC1 Keyblank 5 Pin Schlage
Priced and sold as kit.
For a Polished Brass exterior with White interior, please see 306007 which fits 7/8" thick doors. If your door is thicker, you will need to reuse your current screws for installation