AmesburyTruth Active Patio Door Champion Handle Set with Angled Tower Satin Nickel

Amesbury Truth 40.09.10.111 Patio Sliding door handle set Arch top Satin Nickel
Used by Champion Window and doors with the Nexus 2-hook mortise lock also used with some single point 1-hook mortise locks like the 15142 or 15143
NOTE: The lock will not work with the 15187 2-hook lock, or locks with off center thumb latch. Please check measurements to be sure this will work with your sliding door.

Application: Keyed Sliding door handle
Door thickness: 1-1/4 to 1-1/2" with existing screws
Screw Size: 8-32 x 1-7/8" ( need longer screws for thicker door)
Keyway: Schlage 5 pin SC1, 2 keys
Cylinder Housing Screws: 8-32
Escutcheon Plate Width: 1" (25.4mm)
Escutcheon Plate Length: 9-3/4" (248.1mm)
Escutcheon Plate Thickness: 3/8" (9.5mm)
Screw mounting holes: 8-11/16" (220.7mm)
Handle Projection: 1-7/8" (47.6mm)
Handed: No, fits left or right hand doors
Thumb Latch to Top Screw: 2"
Thumb Latch to Bottom Screw: 6-11/16"
Base Material: Die Cast Zinc
Color/ Finish: Satin Nickel, US15

Handle Set only, does not include the Nexus or other mortise locks
Note: The Angled cylinder tower is offset toward the pull handle for easier access

Related Parts:
8-32 x 2-1/8" Screw for 1-3/4" Thick Doors

Contains:

• 2 × Handles
• 1 × Interior Escutcheon
• 1 × Exterior Escutcheon
• 1 × Angled Cylinder Tower
• 1 × American Cylinder
• 2 × Gaskets
• 2 × Cylinder Z-Clips
• 2 × Hex Head Screws w/ Allen Wrench
• 2 × #8-32 Pan Head Screws
• 2 × #8-32 1-7/8 inch Mounting Screws

Replaces the discontinued Champion 149987 handle set.