Rehand a Peachtree multipoint lock by flipping the latch and swapping the panic-release arms: slide the spring latch off and reverse it, lift the access panels on each side, install the short arm on the exterior and the longer arm on the interior, then verify the failsafe (locked from outside, free from inside) works.
Step-by-Step Instructions
1. Flip the Spring Latch
- Hold the lock so the angled spring latch points downward and gravity pulls it out.
- Slide the latch off the lock body.
- Rotate it 180 degrees so the angled face points the opposite direction, then slide it back into place.
2. Open the First Access Panel
- Lift off the small access panel on one side of the lock body.
- Inside you will see a lever (the panic-release arm) — lift it out of the lock.
- Notice that this arm is the shorter of the two.
3. Open the Other Side and Compare
- Flip the lock over and remove the access panel on the opposite side.
- Lift out the lever on this side — you will see it is the longer arm.
- The longer arm always goes on the interior side of the door because that is what enables the panic release.
4. Swap the Arms
- Install the short arm into the side that will now be the exterior of the lock and reattach the panel.
- Flip the lock and install the longer arm into the side that will now be the interior, then reattach that panel.
- Confirm both panels snap securely back in place.
5. Test the Failsafe
- Throw the deadbolt to engage the lock.
- From the new exterior side, turn the handle hole with a spindle or tool — the latch should not move, which means the failsafe is working.
- From the new interior side (with the long lever behind the panel), turn the handle — the latch should retract and the lock should release, confirming the rehand is complete.
Need Replacement Parts?
Browse the parts and hardware related to this guide:
Peachtree Multipoint Lock Hardware
Need help identifying which multipoint lock you have? Try our Multipoint Lock Identifier and our team will match you to the exact replacement.
Have questions or need a hand? Contact our team — we’re happy to help you find what you need.
If you have any questions or need help identifying the correct part, feel free to reach out or leave a comment. We’re here to help! Visit AllAboutDoors.com for everything door & window related.