Skip to main content
  • Home
  • ›
  • Blog
  • ›
  • How to Reverse the Panic-Release Function on a Peachtree IPD Lock / Change Handing

How to Reverse the Panic-Release Function on a Peachtree IPD Lock / Change Handing

Written by
Web Team
Published on
August 6th, 2026


Reverse the panic-release function on a Peachtree IPD lock to change its handing: identify which side the panic release is on, pop off the black covers, swap the long arm (interior) and short arm (exterior) so the curved part faces away from the latch, and confirm the lock secures from the outside but releases from the inside.


Step-by-Step Instructions


1. Identify Which Side Has the Panic Release

  • The panic release lets someone inside the house turn the lever and open the door even when the deadbolt is locked — it must always be on the interior side.
  • Insert a flat-tip screwdriver into the deadbolt slot and turn it to extend the deadbolt.
  • Insert a spindle into the handle hole and turn it — the side that will not move is the exterior, and the side that releases the latch is the interior.
  • Remember that on a properly oriented IPD lock, the cylinder sits above the handle.


2. Pop Off the Black Covers

  • If the panic release is on the wrong side, the two arms inside the lock need to be swapped.
  • Pop off the black plastic cover on the panic-release side — it pulls off easily.
  • You will see a long arm inside; that long arm is what releases the latch when the lever is turned.
  • Flip the lock over and pop off the cover on the opposite side — that side has a shorter arm.


3. Swap the Long and Short Arms

  • Lift the long arm out of the panic-release side.
  • Lift the short arm out of the opposite side.
  • Install the long arm on the side that will now be the interior, with the curved part of the arm pointing away from the latch.
  • Install the short arm on the side that will now be the exterior, again with the curve pointing away from the latch.


4. Reinstall the Covers

  • Snap the black cover back onto each side of the lock.
  • Confirm both arms are seated and that nothing binds when you move the lever lightly.


5. Test Both Sides

  • With the deadbolt extended, insert the spindle on the new exterior side and turn the handle — the lever should not release the latch.
  • Flip the lock and try the new interior side — the lever should now retract the latch and release the deadbolt.
  • If both sides behave correctly, the panic release has been successfully reversed and the lock is ready to install.
Tip: Take a clear photo of your existing hardware before removing it — it makes part identification much faster if you get stuck.


Need Replacement Parts?

Browse the parts and hardware related to this guide:

Peachtree Multipoint Lock Hardware

Not sure exactly what you need? Use our Part Identifier form and a real human expert will help you pin it down.

Have questions or need a hand? Contact our team — we’re happy to help you find what you need.


If you have any questions or need help identifying the correct part, feel free to reach out or leave a comment. We’re here to help! Visit AllAboutDoors.com for everything door & window related.