Pella 250 Series Sliding Patio Door Lock Strike / Keeper - White

Pella 250 Series

Sliding Patio DoorLock Strike / Keeper - White

This is a keeper for a Pella 250 Series Sliding Patio Door in White. Requires a #2 Phillips screwdriver to install.

Specifications:

• Usage: Pella 250 Series sliding patio doors manufactured July 2019 – Present
• Color: White
• Handed: No
• Height: 5-11/16 inches (145 mm)
• Base Width: 1-1/2 inch (38 mm)
• Depth: 1 inch (25 mm)

Includes:

• Keeper
• 4 × Attachment Screws
• 2 × Alignment Screws

Installation:

1. Unlock and open vent panel 6"-10"
2. Remove the existing screws and remove the keeper.
3. Insert keeper and install the two alignment screws into the slotted holes, but do not fully tighten them yet. The remaining 4 screw holes will wait until the last step.
4. Confirm the keeper and lock align. If needed, adjust the lock and keeper up/down to align with the vent panel lock.
5. When alignment is satisfactory, tighten the alignment screws. and install the remaining attachment screws.