Use the arrows or swipe left to view all images for this product


Non-Handed Diecast Outside Pull with Knockout Plug for Sliding Patio Door

Part Number: 14113
Price:$14.51 to $17.25

Non-handed diecast outside pull with knockout plug for sliding patio door in 3 colors.
This sliding patio door pull improves the grip for open door from the outside.
The 3-15/16 inch hole centers work with other universal type door handles.
The 4-15/16 inch hole pattern is offset 1/8 inch from center line to work with Adams Rite, W&F and similar type mortise latches.

IMPORTANT NOTE:
This outside handle has a knock out hole plug that can be removed so you can install a key cylinder. (key cylinder not included)
Some cylinders may require you to drill out this whole to approximately ½" diameter or to best fit your cylinder.
We have a video tutorial to show you the knock out process.
May need to clean burrs.
If you don't need to use a key cylinder with your door then you do not need to knock out the plug.

Length: 7-1/4 Inch
Width: 1 Inch
Depth: 1 Inch
Screw Center: 3-15/16 Inch or 4-15/16 Inch
Handle Type: Outside
Hole Center: Adjustable
Material: Diecast
Finish: Painted

Available Colors:
Black
White

Contents: 1 Diecast Pull

Related Parts:
14109 - Outside Pull with key cylinder, Weiser keyway, multi-screw hole pattern

This product is similar to or the same as the following part numbers in these brands:
Prime-Line Products: C 1096, C 1113, C 1114