***Extended Backorder Notice - These handle sets will be in stock December 2019***
Some of the handle sets lack installation screws from the vendor. You may want to save the screws that you have currently to re-use!!
The manufacturer does not provide a warranty.
The Original Locks were made in the USA.
There is not a good substitute replacement.
(handle latch only is available, see part # 303014
You have 2 choices
1. Buy a new door
2. Buy this lock - If you purchase this lock you may have to buy another within the year.
The most common point of failure is the latch mechanism.
Avoid letting the door slam shut and lubricate the latch components frequently to reduce the likelihood of failure.
The flat tail piece on the keyed cylinder can fit one of two directions.
For best results extend the deadbolt latch to the locked position before installing the keyed cylinder.
Mortise storm door handle hardware kit with 1-1/2 inch back set in satin chrome.
This kit includes combination spring latch with deadbolt.
Door Thickness: 1-5/8 Inch
Exterior Faceplate Length: 3 Inch
Exterior Faceplate Width: 1-3/8 Inch
Interior Faceplate Length: 5-3/4 Inch
Interior Faceplate Width: 1-13/16 Inch
Interior Handle PZ: 3 Inch
Interior Handle Screw Hole Center: 4-3/4 Inch (4 Holes at 1-3/4 Inch)
Key Housing Length: 2-1/2 Inch
Key Housing Width: 1-3/8 Inch
Keying: Rekeyable American Cylinder Dexter - Kwikset
Deadbolt Backset: 1-1/2 Inch
Spring Latch Backset: 1-1/2 Inch
Spindle Type: Square
Spindle Diameter: 1/4 Inch
Spindle Length: 5-1/16 Inch
Finishes: Satin Chrome only, Polished Brass is discontinued.
Contents: 1 Inside Handle, 1 Outside Handle, 1 Lock Cylinder, 2 Keys, 1 Deadbolt, 1 Spring Latch, 1 Spindle, 2 Keys
Priced and Sold only as a Kit.