Mortise Lock, Storm Door Hardware, Wright - Choose Color

Mortise Lock, Storm Door Hardware, Wright - Choose Color

Available Colors: Polished Brass and Brushed/Satin Nickel

Mortise hardware kit for mortise application in storm and security doors;
Replaces Many Brands - Pado, Papaiz and other storm door mortise locks

NOTE: This lock does not have a finish warranty

Fits doors 1-1/8 to 2 inches thick
Re-keyable 5 pin American cylinder
Yale, Y-11 Keyway.
Single cylinder lock - keyed outside and thumb turn inside
Non-handed lock; Latch can be rotated for left or right hand doors; Instructions included.
Solid Brass handles;
Escutcheon / trim plates screws spaced at 7-1/4 inches;
Lock Face Plate: 13/16 x 7-3/4 inch.
Backset: 7/8 inch
Screw hole spacing on lock face plate: 7 inches

Minor modification may be required; may require drilling new holes or enlarging existing trim plate holes.

Note: For general information about mortise locks, see article on Mortise lock conversion.

Instructional Video: How to Rehand Wright Mortise Lock