Euro Mortise Lock, Off Center Cylinder, 7/8 inch Backset - Choose Color

Complete Universal Solid brass curved style lever handle set mortise type storm door handleset for Andersen, Pella, Larson, Wright and other.

Door Thickness: Fits 1-1/4 to 1-5/8 inch
Escutcheon Trim Plate Screw Spacing: 7-1/4 inch
Mortise Body Backset: 7/8 inch
Mortise Screw Spacing: 7-1/16 inch
Faceplate Length: 7-3/4 inch
Euro Cylinder: Offset cam, re-keyable Kwikset KW-1 two keys
Cylinder Length: 2-1/2 inches ( 1/2" inside - 1-1/2" outside )
Deadbolt Throw: Extends 5/16 inch
Available finishes: Polished Brass, Antique Brass, Satin Nickel, Tuscan Oil Rubbed Bronze

Priced and sold as a package.
Kit Contents: Flat interior escutcheon plate, raised exterior escutcheon plate, mortise body, euro offset cylinder with 2 keys, strike plate, handles, installation screws (for various door thickness), spindles, set screws, bushings, allen wrench.

Best method to relocate escutcheon plate screw holes, if needed.
1. Install lock case
2. Install spindle into handle, tighten set screw.
3. Place handle with inside trim plate (thumb turn) into square hole in lock case.
4. Center trim plate and mark screw holes with pencil.
5. Remove and do the opposite side of door.
6. Center Punch and Drill new 3/8 screws holes.
7. Install lock set according to directions.