Lockmaster Replacement Active lock case 45/92-62 for Multipoint Lock

Generic / After Market Lockmaster Lock case / Lock body case only for Active Multipoint lock.

Application: Replaces Active lock case only 

Faceplate Width:  NONE, Lock case only

Lock Backset:  1-3/4 inch  (45mm) 

Handle- Cylinder PZ:  Double Spindle,  3-5/8 (92mm) and 2.44 inch (62mm) 

Spindle Diameter: 5/16 inch  (8mm)

Lock Case: Spring Latch and Deadbolt 

Handed: No, Reversible. 

Latch reversal: Undo the screw in the latch to remove. Reverse, reinsert and replace screw.

Product Information

This Lockmaster genuine gearbox features an 8mm double spindle with 62/92mm centres and a 45mm backset. Double spindle gearboxes are unsprung and therefore not suitable for use with unsprung handles.

Your Handle set must have a spring cassette otherwise the handles will droop

Operation: 

Lift handle to lock, Turn Key or cylinder thumb turn to secure

Unlock by turning key or cylinder thumb turn, depress handle to retract latch and deadbolt / hook