Complete set of Beige EXTENDED Reach Door Jamb weatherstrip
Used on Wood, Steel and Fiberglass doors with Kerf in frame
High Performance Door Jamb Weatherstrip
Replaces Magnetic and other older styles of Kerf type door weatherstrip
Type: Foam Filled Door Weatherstrip.
2 pieces of 96" extended reach weatherstrip for the lock side and the top (1 will need to be cut down to approximately 36" for the top)
1 piece of 96" standard reach weatherstrip for the hinge side (extended reach will not work on the hinge side of the door -- it's too thick)
*Note: you will have leftover weatherstrip. We encourage you to save these. In the event that your weatherstripping wears in one particular spot you can replace it as needed (you do not have to install this in long strips for the entire side; you can cut it down and replace in sections).
For a complete set of STANDARD Reach weatherstrip see part 844035-KIT
Material and Measurements:
Polyethylene clad urethane foam
Kerf Width: .125 (1/8 inch)
Kerf Height: .438 (7/16 inch)
Extended Reach Length: 2 x 96" piece
Standard Reach Length: 1 X 96" piece
SHIPPING: This part is shipped folded during our shipping process.
The fold puts a crease in the barb / bulb.
This will NOT affect performance when installed.
To have this part shipped straight, you need to add the $15 Straight Shipping Upcharge
to your shopping cart.
This upcharge guarantees that your weatherstrip is not folded during our packing process.