4 x 4 Inch Solid Stainless Steel, 5/8" Left Hand, 5/8" Radius Corner, Square Corner, Brushed Stainless Steel
Solid Stainless Steel 4 x 4 Hinge with Radius and Square corner leafs
Corner: 5/8" Radius & Square Leaf
Material: Stainless Steel
Finish: Brushed Stainless Steel
Thickness: 0.085"
Handing: Left Hand
Sold Each
Features:
Plain Bearing Hinge
Residential Strength
Removable Pin: Yes
Wood Screws Included
Square Corners
Traditional / Classic Theme
Arc Hole Pattern
Plain Bearing Hinge: Plain bearing hinges feature knuckles that are machined to a smooth surface, allowing them to move against one another without bearings. Plain bearing hinges are not recommended for heavy use on high traffic entrance ways, but meet the need of a standard residential door.
Material - Stainless Steel: Stainless steel reacts with oxygen in the air to form a very thin film of chromium oxide on the surface of the steel. This helps prevent the steel inside from rusting, and is great for homes in climates prone to rusting.
Mounting: The standard corners for mortised door hinges are 1/4" radius, 5/8" radius and square corner. It is recommended that three hinges be used on doors up to and including 7.5 feet with one additional hinge for each additional 2.5 feet. Make sure you check your current hinges before making a purchase.
Specifications:
4 Inch Height
4 Inch Width
Made from Stainless Steel
Mount: Mortise
Gauge: 0.085" (Thickness of Hinge Steel)
5 Knuckles
8 Screw holes
Corner: 5/8" Radius & Square Leaf
Material: Stainless Steel
Finish: Brushed Stainless Steel
Thickness: 0.085"
Handing: Left Hand
Sold Each
Features:
Plain Bearing Hinge
Residential Strength
Removable Pin: Yes
Wood Screws Included
Square Corners
Traditional / Classic Theme
Arc Hole Pattern
Plain Bearing Hinge: Plain bearing hinges feature knuckles that are machined to a smooth surface, allowing them to move against one another without bearings. Plain bearing hinges are not recommended for heavy use on high traffic entrance ways, but meet the need of a standard residential door.
Material - Stainless Steel: Stainless steel reacts with oxygen in the air to form a very thin film of chromium oxide on the surface of the steel. This helps prevent the steel inside from rusting, and is great for homes in climates prone to rusting.
Mounting: The standard corners for mortised door hinges are 1/4" radius, 5/8" radius and square corner. It is recommended that three hinges be used on doors up to and including 7.5 feet with one additional hinge for each additional 2.5 feet. Make sure you check your current hinges before making a purchase.
Specifications:
4 Inch Height
4 Inch Width
Made from Stainless Steel
Mount: Mortise
Gauge: 0.085" (Thickness of Hinge Steel)
5 Knuckles
8 Screw holes