Hoppe Single Point Mortise Lock (SPL) ½ Inch Deadbolt Throw 1-3/8 Inch Backset

Hoppe Single Point Mortise Lock (SPL) 1/2 Inch Deadbolt Throw 1-3/8 Inch Backset

PZ (Distance from the center of the handle to the center of the cylinder): 3-5/8 in. (92mm)
Backset: 1-3/8 inch (35 mm)
Deadbolt Throw: 1/2 in. (14mm)
Faceplate Width: 5/8 in. (16mm)
Faceplate Length: 10-3/4 inch (273.1mm)

IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a multipoint
lock. There are no interchangeable parts from this lock that can be used on other locks.