Tilt Latch, Slide in Plastic, 8000 Series - Choose Color
Vinyl window Tilt Latch, Slide-In Plastic Round housing, Scallop Nose & Deluxe Actuator, Latch is about flush with side of Housing
May be Interchangeable with other ones that look similar, note the width of the latch width is most important.
Housing Width: 11/16 inch
Housing Length: 2-11/16 inch
Housing Shape: Round ( Square or Round )
Nose Latch Bolt: Scallop ( Standard or Scallop )
Nose Size: 9/32 inch .248 (6.93mm) ( 5 Widths available)
Stile Snap In: 3/32 inch .092 (2.34mm) ( 5 positions available)
Actuator: Deluxe Thumb Latch, Easy Grip ( 4 choices )
Material: Plastic
Colors: White, Tan, Earthtone, Coppertone ( some colors may be discontinued )
Handed: Yes, 1 Left and 1 Right
Priced and sold in pairs.
Additional Information:
* Housings are square or round ends, either will work on most windows
* Latch Bolt are Straight or Scallops, the scallops are mostly the larger widths and are interchangeable when widths are the same.
* Stile Snap on bottom of housing vary, some have number to ID the offset. This is not critical on most windows. This holds the housing in place.
* Thumb latch actuator is decorative only, does not matter which one you have, They all work the same.
Note: This finger latch assembly slides into a route in top of the window sash. Sometimes you can just push and it will slide out. If not, take a small block of wood and gently tap on the Round end till it slides out.
May be Interchangeable with other ones that look similar, note the width of the latch width is most important.
Housing Width: 11/16 inch
Housing Length: 2-11/16 inch
Housing Shape: Round ( Square or Round )
Nose Latch Bolt: Scallop ( Standard or Scallop )
Nose Size: 9/32 inch .248 (6.93mm) ( 5 Widths available)
Stile Snap In: 3/32 inch .092 (2.34mm) ( 5 positions available)
Actuator: Deluxe Thumb Latch, Easy Grip ( 4 choices )
Material: Plastic
Colors: White, Tan, Earthtone, Coppertone ( some colors may be discontinued )
Handed: Yes, 1 Left and 1 Right
Priced and sold in pairs.
Additional Information:
* Housings are square or round ends, either will work on most windows
* Latch Bolt are Straight or Scallops, the scallops are mostly the larger widths and are interchangeable when widths are the same.
* Stile Snap on bottom of housing vary, some have number to ID the offset. This is not critical on most windows. This holds the housing in place.
* Thumb latch actuator is decorative only, does not matter which one you have, They all work the same.
Note: This finger latch assembly slides into a route in top of the window sash. Sometimes you can just push and it will slide out. If not, take a small block of wood and gently tap on the Round end till it slides out.