Fuhr inline-gear multipoint lock (2 or 3 piece lock case).
For 6-foot 8-inch active sliding patio door.
Spindle Diameter: 5/16 inch (8 mm)
Face Plate Measurements:
Gear section: 5/8 inches wide x 61-3/4 inches long.
Three hooks located 11-3/4 & 27-1/2 from the bottom and 5-3/4 from top when door is in unlocked position.
(There is a top section which is sold separately that locks into the main body to allow for doors of different heights)
Center of handle down to center of first hook slot, 9"
Center of handle down to center of second hook slot, 25"
Center of handle up to center of top hook slot, 19-1/2"
There are 4 tick marks on the bottom end of the faceplate to cut to fit different doors
Lock Body Measurements:
Backset: 1-1/8 inches (28 mm)
Handle PZ (spindle to center of key cylinder): 4-3/4 inches.
(Cylinder will not operate when in unlocked position)
Sticker on some locks: U2/ KOP or 11Z/ KOP.
Related Fuhr Sliding Door Locks:
40211 - backset 1-1/8 (28mm) ( Link to product )
40213 - Backset 1-3/8 (35mm). ( Link to product )
Troubleshooting: How to Open a Stuck FUHR Sliding Door LockHow to Replace the Latch on a Fuhr Lock
Priced and sold each.