Security Door & Window - Miami, Fl., Single Door - Discontinued
This Hardware is Discontinued and is no longer available. Replacement Options Available
Security Door and Window, Miami, Florida is out of business
Manufactured around 1990's.
Original Hardware Specs:
Hole Spacing: 5-1/2 inches (between spring and deadbolt latch)
Backset: 1-3/4 inches.
Old Lock used a standard 5 pin tumbler Schlage SC1 Keyway.
Lock and handle set can be replaced with modifications.
Requires changing to a Single Point Mortise lock
1. Cutting out a 5/8" by 9-1/4" hole in door edge for mortise lock with 1-3/4 inch backset
2. Drilling holes for new handle set trim, 3-5/8 inch centers
3. Changing strike plate on door jamb
Replacement Hardware for single doors shown below in related items
Detailed instructions available on request
Security Door and Window, Miami, Florida is out of business
Manufactured around 1990's.
Original Hardware Specs:
Hole Spacing: 5-1/2 inches (between spring and deadbolt latch)
Backset: 1-3/4 inches.
Old Lock used a standard 5 pin tumbler Schlage SC1 Keyway.
Lock and handle set can be replaced with modifications.
Requires changing to a Single Point Mortise lock
1. Cutting out a 5/8" by 9-1/4" hole in door edge for mortise lock with 1-3/4 inch backset
2. Drilling holes for new handle set trim, 3-5/8 inch centers
3. Changing strike plate on door jamb
Replacement Hardware for single doors shown below in related items
Detailed instructions available on request