Non-Keyed Exterior Handle for Sliding Door - Choose Color
Milgard non-keyed exterior handle for glass sliding doors, No hole for key cylinder
Used with the Classic, Montecito and Tuscany series French sliding patio door
Application: Exterior handle only
Handle Length: 6-7/8 inch
Handle Width: 1-1/4 inch
Screw Hole Spacing: 4-15/16 inch
Note: must use self tapping screws ( not included) holes are not threaded by manufacturer
Colors: White or Tan
Contact office for additional colors:
Almond, Bronze, Brushed/Satin Nickel, Clay, Grey, Taupe, Tweed
Related Parts for Milgard 1-7/16 thick Classic Sliding Door:
14339 - Complete handleset Trim, 1-7/16 thick door, No mortise lock
14340 - Complete kit with mortise lock, 1-7/16 thick door
14342 - V-4 Latch, Double Locking handle 1-7/16 thick Door
14343 - V-2 Latch, Double Locking handle 1-3/16 thick Door
14344 - Inside Pull handle, no mounting plate
14346 - Key cylinder for 14345 outside pull
14348 - Mounting Plate for 14344 inside pull (original M4x25mm - Replace with 8-32 x 1 Thread cutter)
14349 - Outside Pull Handle, no cylinder hole
14350 - Outside Pull Handle, With cylinder hole (8-32x1-9/16 screw )
15137 - internal mortise latch only
15133 - Strike Plate, No Cover
Used with the Classic, Montecito and Tuscany series French sliding patio door
Application: Exterior handle only
Handle Length: 6-7/8 inch
Handle Width: 1-1/4 inch
Screw Hole Spacing: 4-15/16 inch
Note: must use self tapping screws ( not included) holes are not threaded by manufacturer
Colors: White or Tan
Contact office for additional colors:
Almond, Bronze, Brushed/Satin Nickel, Clay, Grey, Taupe, Tweed
Related Parts for Milgard 1-7/16 thick Classic Sliding Door:
14339 - Complete handleset Trim, 1-7/16 thick door, No mortise lock
14340 - Complete kit with mortise lock, 1-7/16 thick door
14342 - V-4 Latch, Double Locking handle 1-7/16 thick Door
14343 - V-2 Latch, Double Locking handle 1-3/16 thick Door
14344 - Inside Pull handle, no mounting plate
14346 - Key cylinder for 14345 outside pull
14348 - Mounting Plate for 14344 inside pull (original M4x25mm - Replace with 8-32 x 1 Thread cutter)
14349 - Outside Pull Handle, no cylinder hole
14350 - Outside Pull Handle, With cylinder hole (8-32x1-9/16 screw )
15137 - internal mortise latch only
15133 - Strike Plate, No Cover