Alignment Tool for IPD multi-point lock
IPD Lock alignment tool.
Used to align slot in the flat bar ( gauge position of bar to latch).
Install flat bar as far as possible, insert tool and slowly remove flat bar until tool drops in slot.
Tighten down set screw.
Note: A small slotted screw driver will do the same thing.
Used with IPD Lock, parts 37400034-KIT (left hand inswing) / 37400035-KIT (right hand inswing)
If you purchase 37400034-KIT or 37400035-KIT, ONLY 1 alignment tool will be included.
If you would like more than 1, you must purchase them separately.
How to Repair an IPD Multi-Point Lock
How to Reverse the Panic-Release Function on a Peachtree IPD Lock / Change Handing
Rehanding a Peachtree Multipoint Lock
Used to align slot in the flat bar ( gauge position of bar to latch).
Install flat bar as far as possible, insert tool and slowly remove flat bar until tool drops in slot.
Tighten down set screw.
Note: A small slotted screw driver will do the same thing.
Used with IPD Lock, parts 37400034-KIT (left hand inswing) / 37400035-KIT (right hand inswing)
If you purchase 37400034-KIT or 37400035-KIT, ONLY 1 alignment tool will be included.
If you would like more than 1, you must purchase them separately.
How to Repair an IPD Multi-Point Lock
How to Reverse the Panic-Release Function on a Peachtree IPD Lock / Change Handing
Rehanding a Peachtree Multipoint Lock