Pella replacement Kit with special handle spacing (PZ) of 85 mm (3-11/32 inches).
This lockset replaces part #9099998, a discontinued Pella single-point mortise lock with an 85 PZ and 55 mm backset.
(1) Single Point 2-3/8" (60mm) Mortise Lock
(1) Euro Profile Key Cylinder for 1-3/4" (45mm) thick Door
(1) Strike Plate
(2) Handles with or with keyed cylinders and thumbturn.
(2) Escutcheon Plates and installation screws
Important Mortise Lock Measurements:
The Mortise Lock is a Single-point Entrance Mechanism with a 3-11/32 inches (85 mm) handle spacing or PZ.
Backset: 2-3/8 inches (60 mm) - Pella was 2-3/16 inches (55 mm)
Faceplate: 7/8 x 9-3/8 inch Square Corners - Pella had Radius corners
This Mortise Lock will fit on older Pella Doors with Single Point Locks (Cifial / Hardware )
Handle-Set Options include:
Color / Finish: Polished Brass
Function: Active: Keyed Euro / Profile Cylinder handle-set with inside Thumb-turn
Note: Replacement is not an exact replacement; some modification to door jamb may be required.
See article: Replacing Pella Old-Style Single-Point Mortise Lock (pending)
Priced and sold as a kit.