This is a active HTL / HOPPE Munchen Lever Handle-set for a multipoint lock.
It is constructed from solid brass and will fit on doors that are 1-3/4 thick.
Includes interior and exterior handle levers with backplates, spindle and all necessary installation hardware.
Lever Design: M112PL Munchen
Back Plate: 374N Traditional
Cylinder Type: 360 degree
Finish: Polished Bright Brass
Escutcheon Plate Length - 8 - 3/4 (8.76)
Escutcheon Plate Width - 1 - 3/8 (1.40)
Handle PZ: 3-5/8 (92mm) (center of handle to center of cylinder)
Screw Holes Spacing:
Top to Bottom screw hole spacing: 7-7/8 inch (7.87)
Top screw hole spacing: 2-3/4 inch (2.76)
Bottom screw hole spacing: 5-1/8 inch (5.12)
Priced and sold as a package.
See additional images.
Active - Used most commonly on the primary functioning door. Cylinder holes on interior and exterior both. Includes lock cylinder with thumb-turn and key set.
Inactive - Used on an inactive panel. Cylinder hole on the interior only. Includes half lock cylinder with thumb-turn only.
Dummy - Handle levers are in a fixed position and will not move. No cylinder hole in either backplate.