Metal Tilt Latch for UPPER Sash 2-3/8" Housing LH
Pro Shield Grey Nose Tilt Latch for Single hung, Double Hung or Slider Windows
Used by Weather Shield, SNE Vetter, Crestline, Peachtree and others
Application: Tilt latch for sliding window
Housing Width: 11/16 inch
Housing Length: 2-3/8 inches
Latch projection: 3/8 inch
Handed: Yes, As Shown
Latch Color: Grey Nylon/ Plastic
Housing Color: Assorted Finishes
Housing Material: Metal
Priced and sold each, no thumb button, no screw
Limited to existing inventory.
No returns, refund, or exchanges.
Installation Note:
This latch is held in with a screw located under the thumb button
To remove button, slide back and insert a small screw driver under the edge and lift up
Remove Phillips head screw and slide latch out.
Tilt Latch Note:
Some companies referred to this as a left hand viewed from the outside. Other times is is referred to as a right hand viewed from inside. Please refer to the image to determine which handing you need.
Used by Weather Shield, SNE Vetter, Crestline, Peachtree and others
Application: Tilt latch for sliding window
Housing Width: 11/16 inch
Housing Length: 2-3/8 inches
Latch projection: 3/8 inch
Handed: Yes, As Shown
Latch Color: Grey Nylon/ Plastic
Housing Color: Assorted Finishes
Housing Material: Metal
Priced and sold each, no thumb button, no screw
Limited to existing inventory.
No returns, refund, or exchanges.
Installation Note:
This latch is held in with a screw located under the thumb button
To remove button, slide back and insert a small screw driver under the edge and lift up
Remove Phillips head screw and slide latch out.
Tilt Latch Note:
Some companies referred to this as a left hand viewed from the outside. Other times is is referred to as a right hand viewed from inside. Please refer to the image to determine which handing you need.