Adjustable Guide Hinge, Top and Bottom
This is an Aftermarket hinge to replace the Universal 4 x 3-5/8 adjustable hinge for swinging doors. This hinge is thinner than most adjustable hinges and will replace the old KTL and Columbus 2D hinges with same hole pattern. Fits Windsor Superior and other hinged doors
Hinge Type: Adjustable, Vertical
Pin Type: Non-Removable, set screw in center of pin to secure
Height: 4 inch (101.6mm) route in door is 3-5/8 inch
Width: 3-5/8 inch (92mm)
Handed: No
Material: Steel
Thickness, Door side: 9/16 inch (14.2mm)
Thickness, Jamb side: 7/64 inch (2.7mm) ( slightly less than an 1/8 inch )
Country of Origin for after market hinge: Taiwan
Typical Door with 3 hinges -
2 x 369900G Guide hinge, Top and Bottom
1 x 369900S Set Hinge, Middle
NOTE: Adjust the vertical hinge, then the horizontal as needed.
The Screw holes are the same as the original, however the adjustment screw has changed
Hinge Type: Adjustable, Vertical
Pin Type: Non-Removable, set screw in center of pin to secure
Height: 4 inch (101.6mm) route in door is 3-5/8 inch
Width: 3-5/8 inch (92mm)
Handed: No
Material: Steel
Thickness, Door side: 9/16 inch (14.2mm)
Thickness, Jamb side: 7/64 inch (2.7mm) ( slightly less than an 1/8 inch )
Country of Origin for after market hinge: Taiwan
Typical Door with 3 hinges -
2 x 369900G Guide hinge, Top and Bottom
1 x 369900S Set Hinge, Middle
NOTE: Adjust the vertical hinge, then the horizontal as needed.
The Screw holes are the same as the original, however the adjustment screw has changed