Special Order, we normally stock one.
REMOVAL AND INSTALLATION MANUAL
Adams Rite Steel Security Ornamental Storm Door Mortise Lock Kit - Brass
Used by Grisham on their bank vault security storm door
Includes Handles, escutcheon plates and keyed cylinders, Mortise Lock and Screws
Does NOT include - Latch Cover plate
Has Left or Right Handed, spring latch on face of lock.
Lock Body Dimensions:
Face Plate 1 x 6-7/8;
Cylinder Backset: 1 inch from front of face plate to center of Cylinder
Handle Back set: 7/8 inch to center of Handle.
Lock Markings: Inspect 010; Grade 1: ANSI 156.5
Escutcheon Plate 1-3/4 x 9 inches;
Hole spacing from center of key Cylinder to center of handle: 5-1/4 inches
Handle Hole Diameter: 1/2 inch
Cylinder Hole Diameter: 1-1/8 inch
NOTE: Hole for cylinder is off center; Handle hole is Centered
Inside Handle Plate: 1-1/16 x 2-1/2 inches
Cylinder Length: 13/16 inch; Adams Rite Tail piece
Keyway: Yale Y1, 5 pin Rekeyable
Handed- YES; Left or Right as viewed from Outside hinge side
Primarily Picture is a Left Hinge Door
40085 - Complete Hardware Kit - Brass - Left
40086 - Complete Hardware Kit - Brass - Right
40087 - Trim Only; Handles and Plate - Brass
40088 - Mortise Lock Body, Right Hand
40089 - Mortise Lock Body, Left Hand
The only difference between the Left and RIght hand hardware is the mortise lock latch.
If you order the wrong handing, you may exchange just the lock case for the opposite one.