This is a Manual operated Multipoint Lock
It features two Tongue Latches
Handle Height: 36"
Deadbolt Throw: 1" or 1/2"
Backset: 35mm, 45mm, 60mm, or 70mm
Face Plate Width: 20mm
PLEASE READ ALL
To choose the correct size of Multi-Point Lock (MPL), you will need to know a few measurements.
First: Backset - 35mm, 45mm, 60mm, or 70mm
Second: Deadbolt Throw - 1" or 1/2"
Third: Distance from Handle Cylinder to Bottom Tongue Position - 24-7/16" - 29-5/8"
Forth: Distance from Handle Cylinder to Top of Door - 42-3/4" - 91"
The first 3 steps will give you the size of Gear you need for your door
The forth step will give you the size of Top Extension you need
Make sure you choose the Top Extension that is closest to your measurement without going UNDER
You can cut off the extra portion of the Top Extension to fit exactly
Please choose from the Size Options below.
NOTE: Due to the extreme variety of Lock sizes, Not all parts are kept in Stock.
Some items will be special order and will take longer to ship.
Article: How to change handing (reverse direction of spring latch) on HOPPE multipoint lock
Article: How to change direction of mishandling device on HOPPE lock