This questionaire is also available in a printable/downloadable version here
- Which do you see stamped on the thin, edge of the metal faceplate running up the entire door edge, "FUHR", "HOPPE " etc.? (This can be found in between the door latch and deadbolt area).
- What is the finish of this faceplate: Brass looking or Stainless Steel?
- Do you know who manufactured the door? How about the windows in your home? If so, please list the company: ____________________________ Year or Age of Door? _____
- Is this for a single door or a pair of double doors (French doors)? ______________
- What is the door thickness: 1 3/4" (45mm) ___ 2 1/4" (57.15mm) ____ Other: __________
- What is the door panel height? (The door panel is the part that opens and closes) ______
- Is the lock a 1, 2, 3 Piece Lock? _________
- What is the distance from the center of the handle down to the bottom horizontal edge of the door: __________
- What is the distance from the center of the handle down to the center of the thumb turn piece? 3 5/8" (92mm) ______ 2 53/64" (72mm) _______ other _______
- What is the distance from the center of the handle to the door edge (edge with the latch and deadbolt on it, not the edge with the hinges)? 1 3/4" (45mm) _____ 1 3/8" (35mm) _____ Other: __________
- With the door ajar, measure how far out the deadbolt extends from the edge of the edge of the door: 1/2" (14mm) _____ 1" (25mm) ______ Other: _________
- Is this a "manual" or "automatic" door? Manual: Must first pull up on handles to operate the multipoint locks. Automatic: The multipoints engage on their own when you close the door? Manual: _____ Automatic: ______
- If you have a tongue version, what is the distance from the center of the handle down to the bottom tongue position? 26 27/64" (671mm): ______ 29 21/32" (753mm)_______ other: _______
- If you have a tongue version, what is the distance from the center of the handle up to the top tongue position? ________ inches
- If you have a roller version (2 or 4 roller, manual or automatic) what is the distance to each of the roller positions from the handle center location? Top _____________ inches Bottom _______________ inches
- If you have a roundbolt version, what is the distance to each of the roundbolt positions from the handle center location? Top _____________ inches Bottom _______________ inches
- Is the Handle Above or Below the key lock cylinder? ____________
