» » »
Double Acting Floor Spring Hinge Details and Installation
Bonco Brand: made in
China (Our Part# 36801)
Wood doors 1-1/8 to 1-3/8 inch
thick weighing up to 60 pounds.
Swings both ways, Hold open
feature at 90 degrees.
- Trim door to fit opening. 1-1/8 less than height,
¼ less than width.
- Cut mortise in door for Hinge.
- Round hinge side of door to 1-1/2 inch radius.
- Center spring in door and screw into place.
- Install top pivot to head jamb and socket to
top of door.
- Tilt door and Insert top pivot, side door into
place.
- Adjust door to opening and screw plate into floor.
- Check door performance, adjust if needed, install
covers.
And yes, All About Doors and Windows does carry Double
Acting Floor Hinges
This article was published on Tuesday 14 April, 2009.
Current Reviews: 0
Tell a friend