Sliding Door Keeper, 1/2 In. Raised Dual Point lock - Stainless Steel

Sliding Door Keeper, 1/2 in. Raised Dual Point lock in Stainless Steel

Raised Double Hole Strike plate used with Double hook sliding door locks.

Width: 5/8 inch

Overall Length: 10-7/8 inches 

Height: 1/2 inch 

Material: Steel
Color / Finish: Stainless Steel

Slotted Holes for screws: 1/2 inch, allows for maximum adjustment
Rectangular Hole for Mortise Latch hooks: 3/8 x 1-1/8 inch

Used on Wood and Vinyl Sliding doors.
Standard Screws: 1-1/4 inch Pan Head - Not Included (longer screws may be used)

NOTE:
There are 7 of these that look the same with different measurements - see below
Heights: 1/2, 5/8, 3/4, 1 inch (Height is from base to highest point.)
Widths: 5/8 Narrow, 3/4 inch Wide

Dual Point Raised Sliding Door Keepers:
15163: 10-7/8 length x 1/2 height x 5/8 width
15164: 10-7/8 length x 3/4 height x 5/8 width
15165: 10-3/4 length x 1/2 height x 5/8 width
15170: 10-7/8 length x 1 height x 5/8 width
15171: 10-11/16 length x 1/2 height x 5/8 width
15173: 10-7/8 length x 1/2 height x 3/4 width
15174: 10-7/8 length x 3/4 height x 3/4 width
15175: 10-7/8 length x 5/8 height x 3/4 width
15177: 10-7/8 length x 1 height x 5/8 width