Use the arrows or swipe left to view all images for this product


Discontinued - Mortise Lock Set, Replacement for Marks 22AC - Brass, LH / RHR

Part Number: 301061
Replace with 301077

This product has been discontinued and is no longer available; Replace with 301077

Discontinued Mortise Lock Set 
Replace with 301077
Replacement for Marks 22 Series Mortise Lockset.

Double Cylinder locks with 2 keys.

Center of the knob to center of key: 3-11/16 inches
Box thickness: 3/4 inch
Box faceplate: 1 inch x 7-1/8 inches
Backset: 2-1/2 inches
Box (not including faceplate): 3-5/16 in x 5-1/2 in

HANDING INFO: OUT SWING DOORS
NOTE: PLEASE read all information; View All Images
The Key can be above or below the handle, if the key is opposite of the diagram, then handing changes from RHR to LHR.
THIS LOCK HAS A KEY ABOVE THE HANDLE
When standing on the outside of the home and the handle is on the right, this is a left-hand outswing door or right-hand reverse (RHR)
Handing can be reversed, better to get the correct handing up front.
Please see additional pictures for more illustrations.

Marks USA Original Hardware available; see Item 301077.

The door can be opened from both sides when the deadbolt is not engaged except when the stop button is engaged; then the door can only be opened from the inside but is locked from the outside and can only be opened with a key. The deadbolt can be engaged or disengaged with the key from either side. Deadbolt deadlocks latch.

Used primarily with steel security and ornamental doors.

Check function and handing before installing. The bevel latch may need to be reversed for panic release to work correctly.
 

Resources:
How to Rehand Marks Mortise Locks: Article

Re-Hand a Mortise Lockset