16 mm Manual Single Point Lock Gear, 45/92 - 1-3/4 (45mm) Backset


  • Part #: 40134
  • Availability:

Price : $85.00

 

IMPORTANT NOTICE: This Single Point Mortise Lock can NOT be used to repair a  multipoint lock

There are no parts from this lock that can be used on other locks. 


THIS IS NOT A REPAIR ITEM FOR MULTIPOINT LOCKS (MPL)

This is a single point lock (SPL) you can not add or modify to work on a MPL 


Hoppe manual single point mortise lock (SPL)
Used by Caradco, Norco and many others, also replaces FUHR Single point locks.

This will not work for replacing the lock body on multipoint lock units.
This is a single point lock and not interchangeable with Mulipoint lockcase

Deadbolt Throw: 1 inch (25 mm).
Stainless Face Plate: 5/8 (16 mm) inch x 10-13/16 inch.
Faceplate Screw Holes: 10-1/8 inch.
Backset: 1-3/4 inch (45 mm) - distance from edge of face plate to center of lock handle.

Related Hoppe Single Point Locks:
Hoppe # -- Backset --- Deadbolt Throw
8778179 -- 1-3/8 --- 1/2 inch
8778175 -- 1-3/4 --- 1/2 Inch
8778151 -- 1-3/8 --- 1 inch
8777959 -- 1-3/4 --- 1 inch
2881323 -- 2-3/8 --- 1 inch
2881331 -- 2-3/4 --- 1 inch

Latch handing may be changed by inserting small screwdriver into small hole in back of latch and pushing forward, Twist latch and release. See additional pictures.
Resources:
Article: How to Drill Out a HOPPE Lock if the Deadbolt Won't Retract
Article: How to Change the Handing of a HOPPE Lock
Replacement Guide: How to Replace a Roto Single Point Lock with a HOPPE

Included Components: